Double direction thrust ball bearings

Description

This type of bearing can withstand axial loads in both directions and can limit the axial displacement of the shaft or housing in both directions. It is not allowed to tilt with the axis of the housing hole during installation.

Double direction thrust ball bearing

Thrust ball bearings are designed to withstand thrust loads at high speeds and consist of a washer-like ferrule with ball rolling groove grooves. Since the ferrule is in the shape of a seat cushion, the thrust ball bearing is divided into two types: a flat base cushion type and a self-aligning spherical seat cushion type. In addition, this bearing can withstand axial loads but cannot withstand radial loads. The bearing has a contact angle of 90 degrees and can only withstand one-way axial load. It can limit the axial displacement of the shaft or the casing in one direction. The axis of the shaft and the casing hole are not allowed to be inclined during installation.

composition

The two-way thrust ball bearing includes a shaft collar, two races and two steel ball-cage assemblies. The bearings are separate and each part can be mounted separately. Two-way bearings and one-way bearings use the same shaft collar, race and ball-cage assembly.

use

Two-way thrust ball bearings can withstand two-way axial loads and are positioned as two-way axial, but must not withstand any radial loads.